CrossInk for Xteink: What It Adds and How to Install It

Short answer

CrossInk is a free fork of the CrossPoint Reader firmware for Xteink e-readers. It keeps CrossPoint's reader and adds reading statistics (shown on the sleep screen if you like), Focus Reading (formerly Bionic Reading), Guide Dots, e-ink-tuned default fonts and a library/collections home screen. It runs on the X4, X3 and, since v1.5.1, the X4 Pro. You install it from its Inky web companion in Chrome or Edge.

If you've used CrossPoint on your Xteink and wanted a bit more personality, CrossInk is the fork most people try next. It's maintained by developer uxjulia, started as a "personal fork", and has become one of the most widely used alternative firmwares in the Xteink community.

Heads up: Flashing firmware is at your own risk. CrossInk moves quickly, so version numbers and steps here reflect the state of things in November 2026. Always check the CrossInk GitHub page and crossink.dev installation docs before you flash.

What is CrossInk?

CrossInk is open-source e-reader firmware for ESP32 devices, forked from CrossPoint Reader. Because it builds on CrossPoint, you get the same foundations: proper EPUB 2/3 rendering with hyphenation, Wi-Fi file transfer, custom sleep screens and SD-card fonts. On top of that it adds features focused on reading habits and typography.

What does CrossInk add over CrossPoint?

Some features first appeared in CrossInk and later landed upstream (Focus Reading is an example), so the gap between the two changes over time.

CrossInk vs CrossPoint vs stock firmware

FeatureStock XteinkCrossPointCrossInk
EPUB renderingBasicEPUB 2/3, hyphenation, kerningSame as CrossPoint
XTC / XTCHYes (native format)YesYes
Custom fontsLimitedSD card fontsSD card fonts + e-ink-tuned defaults
Custom sleep screensSingle image via menusleep.bmp or rotating folderYes, plus stats sleep screen
Reading statisticsNoLimitedDetailed, per book and all-time
Focus Reading / Guide DotsNoFocus ReadingBoth
Calibre / OPDS / KOReader syncNoYesInherited from CrossPoint (check release notes)
DevicesAllX3, X4, X4 Pro, X4 ClassicX3, X4, X4 Pro
InstallPreinstalledcrosspointreader.com flasherInky web companion

We couldn't confirm X4 Classic support for CrossInk at the time of writing. If you own an X4 Classic, check the CrossInk releases page for an S3 build that lists it before flashing.

Which Xteink models does CrossInk support?

CrossInk runs on the Xteink X4 and X3 (ESP32-C3), and on the X4 Pro (ESP32-S3), with full X4 Pro support since v1.5.1 in September 2026. It doesn't run on the Android-based Xteink S4, which launched in China in September 2026. As with CrossPoint, the two ESP32 chip families need different builds. Older CrossInk release notes explicitly warned that certain builds would brick an X4 Pro, so never flash an X3/X4 build onto a Pro.

How to install CrossInk on Xteink X4, X3 or X4 Pro

The recommended route is Inky, CrossInk's official web companion. It runs in Chrome or Edge on a desktop computer.

  1. Back up. Charge the reader and copy anything important off the microSD card.
  2. Open the install page. Go to crossink.dev/installation and follow it to Inky's flash tools.
  3. Choose the build for your exact model. X4 Pro uses the ESP32-S3 option. X4 and X3 use ESP32-C3.
  4. Connect with a USB-C data cable and follow Inky's prompts for putting the reader into download mode.
  5. Keep it connected until flashing finishes, then restart.

Alternatives: macOS and Linux users can flash with esptool as documented in the repo. If you already run CrossPoint or CrossInk, you can also update from a firmware file on the SD card through the device settings.

Locked units

Some Xteinks bought from third-party stores have USB flashing locked. Since May 2026, Xteink has also blocked custom firmware on some X3 and X4 units sold through Chinese retailers. Units from its international store were reported as unaffected. Our CrossPoint guide covers the details. The official Xteink Unlocker supports installing CrossPoint or CrossInk over Wi-Fi on those units. Only use it with the firmwares it lists, because flashing unsupported firmware on a locked unit can permanently brick it.

Should you choose CrossInk or CrossPoint?

Switching is low commitment: you can flash between CrossPoint, CrossInk and stock with the same tools. Other forks exist too. CrumBLE builds on CrossInk with Bluetooth page-turner improvements, for example. PocketInk's firmware comparison keeps a broader list.

Common CrossInk problems and fixes

Do XTC books work on CrossInk?

Yes. CrossInk opens .xtc and .xtch files just like CrossPoint, so a library you've converted with our app moves between firmwares untouched. Converting still makes sense if you want a font, weight or layout baked in exactly, or if a heavy EPUB opens slowly on the device. Read EPUB vs XTC to decide per book.

FAQ

What is CrossInk?

A free, open-source fork of CrossPoint Reader for Xteink e-readers, maintained by uxjulia. It adds reading stats, Focus Reading, Guide Dots, new default fonts and a library home screen.

Is CrossInk better than CrossPoint?

Neither is strictly better. CrossInk is for stats and reading aids. CrossPoint has the broadest device support and gets upstream features first.

Does CrossInk work on the Xteink X4 Pro?

Yes, with full support since v1.5.1 (September 2026). Use the ESP32-S3 build.

Can I install CrossInk on a locked Xteink?

Yes. Use the official unlocker, which supports CrossPoint and CrossInk, and follow it exactly.

Does CrossInk open XTC files?

Yes. It supports EPUB, XTC, XTCH, TXT and BMP like CrossPoint.

Your fonts, your layout, any firmware

Convert EPUB to XTC or XTCH once and read it the same way on stock, CrossPoint or CrossInk. Offline, one-time $9.99.

Get EPUB to XTC Converter