CrossPoint Reader on Xteink: What It Is and How to Install It
Short answer
CrossPoint Reader is free, open-source replacement firmware for Xteink e-readers. It gives you much better EPUB rendering, custom fonts, custom sleep screens, Wi-Fi file transfer, Calibre and OPDS support, and KOReader progress sync. To install it, open crosspointreader.com/#flash-tools in Chrome or Edge, connect the reader with a USB-C data cable, pick your exact model and flash. It takes a few minutes, and you can flash stock firmware back the same way.
CrossPoint is the most popular custom firmware for the Xteink X4, X3, X4 Pro and X4 Classic. If you've seen people on Reddit with nicer-looking books, custom wallpapers or wireless Calibre transfers on a tiny Xteink, they're probably running CrossPoint or one of its forks. This guide covers what it does, which devices it supports, how to install it, and what to do if something goes wrong.
Before you start: Flashing third-party firmware is done at your own risk and may affect your warranty. CrossPoint is a community project. It is not made by or affiliated with Xteink. Steps change between releases, so always check the official CrossPoint README for the current instructions.
What is CrossPoint Reader?
CrossPoint Reader is open-source e-reader firmware for small ESP32-based e-ink devices, with the Xteink line as its main target. It replaces the software Xteink ships on the device, so the hardware stays the same but you get a new reading app, menus and features.
The Xteink runs on a low-power microcontroller rather than a full Linux system like a Kindle or Kobo. That's why stock firmware feels basic, and why a carefully optimised firmware makes such a difference. CrossPoint's developers have put a lot of work into getting proper typography to run within the memory limits of these chips. LWN's look at CrossPoint is a good technical overview.
What does CrossPoint add over stock firmware?
According to the project README (checked November 2026), CrossPoint includes:
- Better EPUB rendering: EPUB 2 and 3, hyphenation, kerning, footnotes and bookmarks.
- Native support for
.epub,.xtc/.xtch,.txtand.bmpfiles. - Custom fonts loaded from the SD card. See our Xteink fonts guide.
- Custom sleep screens, including rotating images and transparent overlays. See our wallpaper and sleep screen guide.
- Wireless file transfer: a web upload page, WebDAV, and a Calibre wireless connection.
- OPDS catalog browser (up to 8 saved servers) for downloading from your own library server.
- KOReader progress sync, a StarDict dictionary, highlights and clippings.
- Hardware extras: touch reading and USB Drive mode on the X4 Pro, tilt page turns on the X3, and Bluetooth page turners.
- Night mode, UI themes and dozens of interface languages.
- Over-the-air updates once it's installed.
Which Xteink models does CrossPoint support?
| Model | Chip | Screen | CrossPoint support |
|---|---|---|---|
| Xteink X4 (original) | ESP32-C3 | 4.3", 480×800 | Yes (X4 build) |
| Xteink X3 | ESP32-C3 | 3.7", 528×792 | Yes (X3 build) |
| Xteink X4 Pro | ESP32-S3 | 4.3" | Yes (X4 Pro build) |
| Xteink X4 Classic (X4 V2) | ESP32-S3 | 4.3" | Yes, since 1.6.5 (dedicated x4c build in v2.0.0) |
CrossPoint is for Xteink's ESP32-based readers only. It does not run on the Xteink S4, an Android 11 model with a 4.3-inch screen that launched in China in September 2026. The S4 runs Android reading apps instead.
The important detail is the chip split. The original X4 and X3 use an ESP32-C3, while the X4 Pro and X4 Classic use an ESP32-S3. Firmware for one family will not work on the other. Never flash an X3/X4 image onto an X4 Pro or X4 Classic. Not sure which model you have? See our Xteink models compared guide.
How to install CrossPoint on Xteink X4 or X3
The official route is the browser-based web flasher. It uses Web Serial, so you need Chrome or Edge on a desktop computer. Safari and Firefox won't work.
- Charge the reader and back up your files. Copy anything you care about off the microSD card. Some guides, such as PocketInk's flashing guide, also suggest saving a full flash backup first using the flasher's read option. This is slow but gives you an exact copy to restore.
- Connect with a USB-C data cable. Charge-only cables are the most common reason the flasher "can't find" the device.
- Open crosspointreader.com/#flash-tools.
- Select your exact device and an official CrossPoint release. Use "Custom .bin" only if you know you need a specific build.
- Start flashing and choose the reader in the browser's serial-port dialog. Keep the cable connected until it finishes.
- Restart the reader. You should boot into CrossPoint. Your books on the SD card stay where they were.
Command-line users can flash with esptool.py instead. The README shows --chip esp32c3 for the X3/X4 and --chip esp32s3 for the X4 Pro and X4 Classic.
How to install CrossPoint on the X4 Pro or X4 Classic
The process is the same, but you must pick the X4 Pro / X4 Classic (ESP32-S3) option in the flasher. Official X4 Pro support arrived in the 1.6 release line, and X4 Classic support in 1.6.5 (September 2026). Version 2.0.0 (November 2026) ships separate x4c and x4pro builds. CrossPoint on the X4 Pro supports the touchscreen and adds a USB Drive mode for drag-and-drop file transfer. If your firmware is old, update before you go looking for these features.
Is Xteink blocking custom firmware?
Partly. In May 2026, Liliputing reported that Xteink had started blocking third-party firmware on some X3 and X4 units, mainly those sold through Chinese retailers such as Taobao. In a message to customers, Xteink said some users had poor performance, crashes and even screen damage after installing unofficial firmware. It also said it won't offer official repairs on devices running it. Good e-Reader reported that overseas X4 units, both new and already sold, would not be restricted, and that Xteink stepped back from wider plans after customer backlash.
As of November 2026, the situation is a patchwork rather than a blanket ban, and it may change for future models. We couldn't confirm which stock firmware versions or production batches are affected. Practical advice:
- Buy from Xteink's international store (or Amazon) if custom firmware matters to you. The CrossPoint README says units bought directly from xteink.com don't need unlocking.
- Try the normal web flasher first. Many "locked" reports turn out to be a charge-only cable or the wrong browser.
- Be cautious with stock updates if you plan to flash later. Since lock behaviour is set by Xteink's firmware and region, some owners flash CrossPoint before accepting new stock updates. This is a precaution, not a confirmed rule.
What if my Xteink is locked?
Some Xteink units sold through third-party stores, especially AliExpress and Chinese retailers, ship with USB flashing locked. On those, the web flasher can't write firmware.
Before assuming your unit is locked, try another data cable, another USB port and another browser. If it really is locked, use the official Xteink Unlocker. It installs supported community firmware over a local Wi-Fi hotspot instead of USB. Community guides also describe an SD card route for locked X3 units. The unlocker describes itself as a last resort and only supports CrossPoint and CrossInk. The README warns that flashing any other firmware on a USB-locked device can permanently brick it, and locked units can't make a full USB backup first. Follow the on-screen instructions exactly.
How do you get books onto CrossPoint?
- microSD card: copy EPUB, XTC, XTCH or TXT files onto the card from your computer.
- Web upload: start the file transfer server on the reader and open its address in a browser on the same Wi-Fi network.
- Calibre: CrossPoint has a Calibre wireless connection, and there's a CrossPoint plugin for Calibre. Full walkthrough in Xteink + Calibre.
- OPDS: browse and download from an OPDS server such as Calibre-Web.
- USB Drive mode on the X4 Pro.
More options, including what to do about store-bought books, are in How to get books on your Xteink.
Should you still convert EPUB to XTC on CrossPoint?
Often you won't need to, because CrossPoint's EPUB rendering is good. Converting to XTC still helps in a few cases:
- Large or complex EPUBs. These can be slow to open on a microcontroller, while an XTC is just finished pages.
- Exact typography, including fonts, weights and spacing you've tuned on your computer.
- Scripts that render poorly on-device, or landscape layouts.
- Moving between firmwares. XTC looks the same on stock, CrossPoint and forks.
Our EPUB vs XTC comparison covers the trade-offs in detail.
How to go back to stock Xteink firmware
The CrossPoint flash tools page can also flash Xteink's official firmware back onto supported devices. Connect the same way, choose the official firmware option for your model, and flash. If you saved a full flash backup before installing, restoring it puts the device back exactly as it was.
CrossPoint forks: CrossInk and others
Because CrossPoint is open source, several forks exist. The best known is CrossInk, which adds reading statistics, Focus Reading (formerly Bionic Reading), Guide Dots and different default fonts. We compare them in CrossInk vs CrossPoint. Forks follow their own release schedules, so read each project's install notes before flashing.
FAQ
Is CrossPoint Reader free?
Yes. It's free and open source, built by the community, and not affiliated with Xteink.
Which Xteink models does CrossPoint support?
The X4 and X3 (ESP32-C3), and the X4 Pro and X4 Classic (ESP32-S3). Always pick your exact model in the flasher.
Will installing CrossPoint void my warranty?
It may. Flashing third-party firmware is at your own risk, though you can usually flash official firmware back.
Can I go back to the stock Xteink firmware?
Yes. Use the flash tools page to flash the official firmware, or restore a full backup if you made one.
Is Xteink blocking custom firmware?
On some units. Since May 2026, some X3 and X4 units sold through Chinese retailers block third-party firmware. International-store units were reported as unaffected, and locked units can use the official unlocker.
Does CrossPoint read XTC files?
Yes. It opens .epub, .xtc, .xtch, .txt and .bmp files, so your converted books keep working.
What if the flasher can't find my Xteink?
Try a USB-C data cable, another port, and Chrome or Edge, and close other serial apps. If it still fails, the unit may be USB-locked and need the unlocker.
Pages that look right on any firmware
Convert EPUB to XTC or XTCH with your own fonts, margins and spacing. Works on stock, CrossPoint and CrossInk. Offline, one-time $9.99.
Get EPUB to XTC Converter