Xteink X4 Classic (X4 V2) Guide: Specs, Books, Firmware & Cases
Short answer
The Xteink X4 Classic (also sold as the X4 V2) replaced the original X4 in September 2026. It keeps the 4.3-inch 480×800 E Ink screen but is thinner (4.9 mm), has a bigger 920 mAh battery and uses new side page buttons. It has no front light and no touchscreen, and it charges through magnetic pogo pins instead of USB-C. It reads DRM-free EPUB, TXT and XTC/XTCH files and costs $79 at xteink.com (November 2026).
Xteink's lineup has three current readers: the X4 Classic, the newer front-lit X4 Pro, and the smaller X3. The Classic is the straightforward one: the original X4's screen in a slimmer body, at the lowest price. This guide covers its specs, how it differs from the original X4 and the X4 Pro, how to get books on it, firmware, and the accessories that do (and don't) fit.
Xteink X4 Classic specs
Figures come from Xteink's official listing unless noted. Resolution and PPI match our converter's X4 preset (we calculate PPI from resolution and diagonal).
| Spec | Xteink X4 Classic (X4 V2) |
|---|---|
| Screen | 4.3-inch E Ink, 480×800 (~217 PPI) |
| Front light | No |
| Touchscreen | No. Physical page buttons on both sides, plus optional motion page-turn |
| Size | About 114 × 69 mm footprint, 4.9 mm thick (independent measurements put it nearer 5.1 mm) |
| Weight | ≈68 g (Xteink's store listing; one Xteink blog post says 77 g) |
| Battery | 920 mAh |
| Storage | 16 GB microSD included, up to 256 GB |
| Charging | Magnetic pogo pins (adapter included, USB-C cable not included) |
| Book transfer | Xteink app, microSD, Wi-Fi hotspot upload |
| Chip | ESP32-S3 (per the CrossPoint README) |
| Launched | September 2026 |
| Price | $79 (xteink.com, November 2026; also sold on Amazon) |
X4 Classic vs original X4: what changed?
Xteink confirmed in August 2026 that the original X4 had sold out with no plans to make more. The Classic is its replacement, and despite the name it's a substantially new device:
- Thinner and lighter. About 1 mm thinner, with the same footprint.
- Bigger battery: 920 mAh, up from 650 mAh.
- New buttons. The original's single rocker is replaced by a page-turn button on each side, the same layout as the X4 Pro.
- Pogo-pin charging instead of USB-C. This is the change owners complain about most, because you need Xteink's magnetic adapter. Xteink has said USB-C will return on future models.
- New chip (ESP32-S3). Firmware files for the original X4 won't work on the Classic, and the reverse is also true.
- Same screen. It's still 4.3 inches at 480×800, so XTC books made for the original X4 work unchanged.
In The eBook Reader's review, the reviewer called the Classic's contrast "outstanding" and said text "just pops off the screen". They named it their favourite Xteink. Their cons were no USB port, a more plasticky build and stock software that's still a work in progress.
X4 Classic vs X4 Pro: which should you get?
| X4 Classic | X4 Pro | |
|---|---|---|
| Screen | 4.3", 480×800 | 4.3", 480×800 |
| Front light | No | Yes, warm and cool |
| Touch | No | Yes, plus buttons |
| Battery | 920 mAh | 1100 mAh |
| Thickness / weight | 4.9 mm / ≈68 g | 5.95 mm / ≈72 g |
| USB drive mode (stock) | No | Yes |
| Price (Nov 2026) | $79 | $99 |
Get the X4 Pro if you read in bed or in dim light. Without a light, the Classic is a daylight-only reader. Get the Classic if you mostly read outdoors or under a lamp and want the slimmest body and the crispest contrast (there's no touch or light layer over the screen). For the full lineup, including the X3, see Xteink X3 vs X4 Classic vs X4 Pro.
How to get books on the X4 Classic
- microSD card. Copy EPUB, TXT or XTC files onto the included card from a computer. This is the most reliable method.
- Xteink app. The official XTEINK app (iOS and Android) sends files from your phone after you pair the reader.
- Wi-Fi hotspot upload. In the Sync menu, start the Wi-Fi hotspot, then open the address shown on screen in a browser on the same network and upload files.
Unlike the X4 Pro, the Classic's listing doesn't include USB transfer. Our book transfer guide covers every method in detail, and the Xteink setup guide walks through first boot, pairing and updates.
Does CrossPoint work on the X4 Classic?
Yes. Early guides (including ours) said the Classic wasn't supported, but the open-source CrossPoint Reader firmware added official X4 Classic support in version 1.6.5 (late September 2026). The v2.0.0 release (November 2026) ships a dedicated x4c build. You flash it from the web flasher at crosspointreader.com in Chrome or Edge, connecting the Classic through its pogo-to-USB-C adapter with a data-capable cable.
Use the right build. The Classic needs the X4 Classic image, not the original X4 or X3 build. Back up your stock firmware first if the flasher offers it. Xteink's warranty doesn't cover problems caused by unofficial firmware, although Xteink advertises an "Unrestricted Firmware Guarantee" for Classics bought from its own store.
X4 Classic cases and accessories
Original X4 cases don't fit the X4 Classic. The footprint is the same, but the Classic is thinner, its magnets moved and it has buttons on both sides. Most free 3D-printable cases online were made for the original X4. Classic cases don't fit the X4 Pro either. Xteink sells Classic-specific magnetic cases (around $9), a magnetic charging adapter and a stand. Our Xteink cases and accessories guide lists what fits each model.
Making books look good on a 4.3-inch screen
The Classic's high contrast suits small text, but the stock EPUB engine gives you limited control over margins, hyphenation and fonts. You have two fixes: install CrossPoint for a better EPUB renderer, or pre-render books as XTC files so every page is laid out exactly how you set it on your computer.
Our EPUB to XTC Converter has an X4 preset (480×800) that matches the Classic. Choose any font, margins and line spacing, preview the page in e-ink tones, and batch-convert your library to XTC (1-bit) or XTCH (2-bit grayscale).
FAQ
Is the Xteink X4 Classic the same as the X4 V2?
Yes. Xteink sells it as the X4 Classic, and it is widely called the X4 V2. It replaced the original X4 in September 2026.
Does the Xteink X4 Classic have a light?
No. The X4 Classic has no front light and no touchscreen. The X4 Pro is the only current Xteink with a front light.
Does the X4 Classic have USB-C?
No. It charges through magnetic pogo pins using Xteink's adapter, which plugs into a USB-C cable. The adapter is included but the cable is not.
Do original Xteink X4 cases fit the X4 Classic?
No. The footprint is the same, but the Classic is thinner, its magnets moved and it has buttons on both sides, so original X4 cases and most 3D-printed X4 cases don't fit. Buy a case made for the X4 Classic.
Can I install CrossPoint on the X4 Classic?
Yes. CrossPoint Reader added X4 Classic support in version 1.6.5 (September 2026), and v2.0.0 includes a dedicated X4 Classic build. Flash it from crosspointreader.com in Chrome or Edge.
What resolution should XTC files be for the X4 Classic?
480×800 pixels, the same as the original X4 and the X4 Pro. XTC files made for any X4 model work on the Classic.
Typeset books for your X4 Classic
Batch convert EPUB to XTC or XTCH at the Classic's native 480×800, with your own fonts, margins and spacing. Offline, one-time $9.99.
Get EPUB to XTC Converter