Xteink Cases & Accessories: What Fits the X4 Classic, X4 Pro and X3

Short answer

  • Cases are model-specific. Cases for the original X4 don't fit the X4 Classic, and Classic cases don't fit the X4 Pro or the X3. Check the model name before you buy.
  • Official cases from Xteink cost about $4–11 (November 2026) and keep the magnetic back working.
  • Free 3D-printable cases on MakerWorld and Printables are mostly for the original X4.
  • Charging: the X3, X4 Classic and X4 Pro all use the same magnetic pogo adapter. A spare adapter ($5.99) is the most useful accessory to buy.

Xteink's three current readers, the X4 Classic, X4 Pro and X3, look alike but differ by a millimetre or two in thickness, button layout and magnet placement. That's enough that cases rarely cross over. This guide lists what fits each model, which accessories are worth buying, and the ones owners say to avoid.

Which Xteink case fits which model?

Your readerSizeFitsDoesn't fit
X4 Classic (X4 V2)≈114 × 69 × 4.9 mmCases labelled "X4 Classic" or "X4 V2"Original X4 cases, X4 Pro cases, most 3D-printed "X4" cases
X4 Pro≈111 × 69 × 5.95 mmCases labelled "X4 Pro"X4 Classic and original X4 cases
X3Smaller 3.7" bodyCases labelled "X3"Any X4-family case
Original X4 (discontinued)≈114 × 69 × 5.9 mm"X4" cases, including most MakerWorld and Printables designsX4 Classic cases

Dimensions come from Xteink's listings and Liliputing (X4 Pro). Independent measurements put the Classic and original X4 about 0.2 mm thicker than the official figures. Reviewer Joshua Lowcock found the Classic "not compatible with any existing X4 accessories", including 3D-printed cases, because the thickness, magnets and side buttons all changed.

Official Xteink cases

Xteink's store sells cases for each current model. US prices seen in November 2026:

AccessoryModelsPrice
Magnetic caseX4 Classic, X4 Pro (separate versions)$8.99, themed designs $10.99
Protective caseX4 Classic$3.99
Base StandCurrent modelsfrom $19.99, $24.99 with adapter
Magnetic charging adapterX3, X4 Classic, X4 Pro$5.99
Pogo charging cableX3, X4 Classic, X4 Pro$4.99 (often sold out)

Xteink's EU store also lists a magnetic reading light and matte or tempered-glass screen protectors. Prices and stock change often, and Xteink runs sales on accessories (its Black Friday campaign runs November 19–30, 2026), so check xteink.com for current listings.

Third-party and 3D-printed cases

Charging cables and adapters

No current Xteink has a USB-C port. The X3, X4 Classic and X4 Pro all charge through magnetic pogo pins, using the same adapter that converts pogo to USB-C. The X4 Classic box includes the adapter but no USB-C cable, so use your own. If you plan to install CrossPoint firmware, the cable must carry data, not just charge.

Owners' most common complaint is losing or misplacing the adapter. Reviewers also call the magnetic connection "finicky", so a second adapter ($5.99) for your bag is cheap insurance. Xteink has said USB-C ports are coming back on future models. The original X4 is the only one with USB-C.

Phone attachment and magnets

Every current Xteink has magnets in the back. They snap onto iPhones with MagSafe-style magnets and onto magnetic phone cases. For other phones, Xteink includes adhesive metal rings (spares are sold separately). Many owners carry the X3 this way. Reviewers note the hold is good enough for reading but not secure in a pocket, so a magnetic case on the reader helps.

Screen protectors and reading lights

Be careful with both. According to owner reports collected by PocketInk, cracked screens are often caused by clip-on reading lights clamped too tightly and by screen protectors that don't fit. If you want a protector, buy one cut for your exact model. Matte protectors cut glare but slightly soften text. For a light, a magnetic or neck-worn lamp is safer than a clip, or choose the X4 Pro, which has a built-in front light.

Page-turner remotes

Xteink doesn't sell an official remote. The eBook Reader reports a $15.99 Bluetooth page turner on Amazon that works with Xteink readers. Remote support depends on firmware, so check before relying on one.

Best accessories for a new Xteink owner

  1. A spare charging adapter. It's cheap and you'll eventually lose the first one.
  2. A case for your exact model. The official magnetic case keeps the phone-mount trick working.
  3. A larger microSD card if you keep a big library or manga (the readers support cards up to 256 GB).
  4. Free upgrades: custom sleep screens (make them with our free sleep screen maker), better fonts and CrossPoint firmware.

The upgrade most owners notice is better typography. Our EPUB to XTC Converter lays out your DRM-free EPUBs as XTC pages for your exact screen, with your choice of font, margins and spacing.

FAQ

Do Xteink X4 cases fit the X4 Classic?

No. The X4 Classic has the same footprint as the original X4 but is about 1 mm thinner, its magnets moved and it has buttons on both sides. Original X4 cases and most 3D-printed X4 cases don't fit. Buy a case labelled X4 Classic or X4 V2.

Do X4 Classic cases fit the X4 Pro?

No. The X4 Pro is slightly shorter and thicker (about 111 × 69 × 5.95 mm) than the X4 Classic, so it needs an X4 Pro case.

What is the best Xteink X3 case?

Use a case made specifically for the X3, such as Xteink's own, so the magnetic back and buttons line up. If you're unsure of fit, a soft sleeve is the safest choice. X4-family cases are too big.

What charger does the Xteink X4 Classic use?

A magnetic pogo-pin adapter that connects to a standard USB-C cable. The adapter comes in the box but the cable doesn't. The X3 and X4 Pro use the same adapter.

Does Xteink work with MagSafe?

Xteink readers have magnets in the back and snap onto MagSafe-style iPhones and magnetic phone cases. Xteink includes adhesive metal rings for phones without magnets. Xteink doesn't market it as official MagSafe.

Should I use a screen protector on my Xteink?

Only one cut for your exact model. Owners report cracked screens from protectors that don't fit and from clip-on lights clamped too tightly.

The upgrade you'll notice on every page

Convert DRM-free EPUBs to XTC or XTCH for your exact Xteink screen, with your own fonts and spacing. Offline, one-time $9.99.

Get EPUB to XTC Converter