Xteink X4 Pro Guide: Specs, Setup, Books & Firmware

Short answer

The Xteink X4 Pro is Xteink's top pocket e-reader. It has a 4.3-inch 480×800 E Ink screen, a front light, a touchscreen on top of the physical page buttons, a 1100 mAh battery and weighs about 72 g. It reads DRM-free EPUB, TXT and Xteink's native XTC/XTCH files. As of November 2026 it sells for $99 on sale ($129 regular) at xteink.com.

The Xteink X4 Pro (also called the X4 V2 Pro before launch) takes the phone-sized X4 and fixes its two biggest complaints: you can now read in the dark, and you can tap or swipe instead of only pressing buttons. This guide covers the specs, what the X4 Pro reads, how to get books onto it, firmware options, and how it compares with the rest of the lineup.

Xteink X4 Pro specs

These figures come from Xteink's official store listing unless noted. Resolution is consistent across reviews such as Digital Trends' X4 Pro review.

SpecXteink X4 Pro
Screen4.3-inch E Ink, 480×800 pixels (~217 PPI, calculated from resolution and diagonal)
ControlsTouchscreen + physical page-turn buttons
LightingFront light (reviewers report adjustable brightness and warmth)
Storage16 GB, expandable by microSD up to 256 GB
File transferXteink app, microSD card, USB
Battery1100 mAh
Weight≈72 g
BackMagnetic backplate
ChipESP32-S3 (per the CrossPoint Reader README)
Price$99 sale / $129 regular (xteink.com, as of November 2026)

What's new compared with the original X4?

The original X4 was a buttons-only, unlit 4.3-inch reader that Xteink has since discontinued. The X4 Pro keeps the same screen size and resolution and adds:

One trade-off reviewers mention: the touch layer and light diffuser make text look slightly "sunken" under the glass compared with the non-touch X4 and X3. Most people won't notice unless they compare side by side.

For a full side-by-side of every model, see Xteink X3 vs X4 Classic vs X4 Pro.

Does the X4 Pro have a backlight?

Not technically. It has a front light, which is how every E Ink reader lights the screen (LEDs at the edge shine across the panel, rather than through it like a phone). People searching for an "Xteink backlight" or "Xteink light" are usually looking for this feature, and the X4 Pro is the only current model with it. If you own an unlit Xteink, a small clip-on or magnetic reading light is the usual workaround.

What file formats does the Xteink X4 Pro read?

It does not read DRM-protected books such as Kindle or Kobo store purchases, or library loans that use Adobe DRM. Our guide to Kindle and Libby books on Xteink explains your legitimate options.

Should you use EPUB or XTC on the X4 Pro?

EPUB is the easy option: copy and read, and change font size on the device. XTC is for when you want the page to look right: your own font, tuned margins and line spacing, proper hyphenation and identical layout every page. The trade-off is that layout is baked in, so changing the font size means re-converting. Our EPUB vs XTC comparison goes into detail.

If you want XTC files for the X4 Pro, our EPUB to XTC Converter uses the X4 preset (480×800), which matches the X4 Pro's screen. It batch-converts EPUBs with your choice of font, margins, line height and 1-bit or 2-bit output, and shows a live e-ink preview first.

How to get books on the Xteink X4 Pro

You have three built-in options:

  1. microSD card. Copy EPUB, TXT or XTC files onto a card from your computer and insert it. This is the most reliable method and works with any firmware.
  2. USB. The X4 Pro supports USB transfer, which the X3 and X4 Classic don't list.
  3. Xteink app. Xteink's XT-Cloud app sends files from your phone wirelessly.

If you install CrossPoint firmware you also get a browser-based file upload page, WebDAV, OPDS catalogs and a Calibre wireless connection. See How to get books on your Xteink and Using Calibre with Xteink for step-by-step instructions.

Can you install CrossPoint on the X4 Pro?

CrossPoint Reader is free, open-source replacement firmware for Xteink devices. Its README lists the ESP32-S3-based X4 Pro as supported, with touch reading and a USB drive mode, alongside better EPUB rendering, custom fonts, KOReader progress sync and custom sleep screens. Install it from the project's web flasher, and you can flash Xteink's official firmware back the same way.

Before you flash: the X4 Pro and X4 Classic use a different chip (ESP32-S3) from the X3 and original X4 (ESP32-C3). Never flash a firmware image built for a different model. Support for brand-new hardware can lag behind, so read the current release notes first. The community fork CrossInk also added early X4 Pro support, including front light and touch.

X4 Pro tips

Is the Xteink X4 Pro worth it?

If you want a true pocket reader you can use in the dark, the X4 Pro is the one to get: the front light and touchscreen are the features the original X4 lacked. If you only read in daylight and want the cheapest option, the X4 Classic ($79 sale as of November 2026) keeps the same screen without the light. If you want the smallest, sharpest-looking screen, consider the X3. Reviewers' verdicts are collected in our Xteink review roundup. Our model comparison breaks down which to buy.

If you're comparing against mainstream readers, see Xteink vs Kindle and other small e-readers.

FAQ

Does the Xteink X4 Pro have a backlight?

It has a front light, not a backlight. The X4 Pro is the only current Xteink with built-in lighting; reviewers describe it as adjustable in both brightness and warmth. The X3 and X4 Classic have no light.

Can the Xteink X4 Pro read EPUB files?

Yes. Stock firmware opens DRM-free EPUB and TXT files with basic typography. It also reads Xteink's native XTC and XTCH formats, which are pre-rendered on a computer for precise fonts and layout.

Is the X4 Pro the same as the X4 V2 Pro?

Yes. Early leaks and pre-launch coverage called it the X4 V2 Pro; Xteink sells it as the X4 Pro. The non-Pro successor to the original X4 is the X4 Classic, also called the X4 V2.

Does CrossPoint firmware work on the Xteink X4 Pro?

The CrossPoint Reader project lists the X4 Pro as a supported device, with touch reading and a USB drive mode. Support for a new device can lag stock firmware features, so check the project's release notes before flashing.

What screen resolution does the X4 Pro have?

The X4 Pro uses a 4.3-inch E Ink screen at 480×800 pixels, about 217 pixels per inch, the same size and resolution as the original X4 and the X4 Classic.

Can I read Kindle books on the Xteink X4 Pro?

Not directly. Kindle books are DRM-protected and the X4 Pro only reads DRM-free files. You can read DRM-free EPUBs from many stores and public-domain libraries.

Get beautifully typeset books on your X4 Pro

Batch convert EPUB to XTC or XTCH sized for the X4 Pro's 480×800 screen, with your own fonts and spacing. Offline, one-time $9.99.

Get EPUB to XTC Converter